|
|
|
AR (anti-reflection) and AGAR (anti-glare x reflection) film
Sheet Type
|
| ‘ MTAR --- High Performance E Anti-Reflection film (Permanent adhesive
type) |
 |
Too much light reflection on the window ?
Unable to see inside the showcase
because of the lights reflection ?@
In such cases, AR film may be a perfect solution !
AR Film eliminates the reflection of ambient light
down to less than10% when laminated on
both sides of glass or plastic materials |
| Left |
FGlass with NO AR film |
| Right |
FGlass with AR film |
|
|
 |
t = 74Κm (without a protective lyr)
*Image is for explanatory purposes.
Ratio of each lyr is rough figure
and different from actual value. |
| Item Code |
Size |
|
Unit Price |
| MTAR-1 |
1000 x 485 mm
(effective area 980 x 480 mm) |
|
$156 |
| MTAR-3 |
485 x 330 mm
(effective area 480 x 325 mm) |
|
$55 |
Apply AR film on both sides for full effect.
Light reflects both on the front and the reverse side of glass surface.
Reflections are approx 4-5% for each side, and total reflection sum up
to approx 10%.
AR film reduces reflection down to approx 0.5% on each side and therefore
applying film on both side
would reduce total reflection down to less than 1% (1/10).
** Applying on only one side leaves out 5.5% reflection. Therefore please
apply on both side. |
| |
Front
reflect |
|
Back
reflect |
|
Total
reflect |
| without AR film |
5.0 % |
+ |
5.0 % |
= |
10.0 % |
| AR film on one side |
0.5 % |
+ |
5.0 % |
= |
5.5 % |
| AR film on both side |
0.5 % |
+ |
0.5 % |
= |
1.0 % |
|
Notice : Multi-layered glass such as
double/ triple glazing glass requires
film to be applied on every surface.
For instances, double glazing glass requires
film to be applied on all 4 surfaces. |
| ‘ MTAGAR --- High Performance E Anti-Glare x Reflection film (Permanent
adhesive type) |
 |
‘ AG (Anti-glare) + AR (Anti-reflection)
In addition to AR effect, AGAR diffuses
and eliminates highlights which can
not be eliminated only by AR film.
Because of the diffusion treatment,
AGAR film is effective only when the
object behind the glass is within 1cm.
(**it will look blurry when it is set at distance)
AGAR - JAGAR-Pad Film (low-tack adhesive)
is recommended for PC Monior and smart devices. |
| |
|
 |
t = 74Κm (without a protective lyr)
*Image is for explanatory purposes.
Ratio of each lyr is rough figure
and differ from actual product value. |
| Item Code |
Size |
|
Unit Price |
| MTAGAR-1 |
1000 x 485 mm
(effective area 980 x 480 mm) |
|
$156 |
| MTAGAR-3 |
485 x 330 mm
(effective area 480 x 325 mm) |
|
$55 |
| Oprical properties |
| Reflectance |
 |
| Minimum reflectance |
0.35% at 550nm |
| Average reflectance |
0.6% |
| Permeavility of all rays |
94.87% |
| Environment resistance |
| Heat cycle |
80 x 500h |
OK |
| Wet heat resistance |
65 x 95%RH x 500h |
OK |
| Chemical resistance |
| Ethanol |
Exposure to dorps each chemical for 24 hr |
OK |
| 10% solt water@ |
OK |
| 5% cleamer |
OK |
| coffee |
OK |
| cola |
OK |
| Lip stick |
OK |
* Above data are actual measurement values and not guaranteed value.
Please inquire for bulk price for more that 10 unit order
|
