Microscope
Microscope Adapter
Bio Equipment
LED Fluorescent Light
Opt Film & Product
Optical Film & Filter
AR Film
      AR film (sheet)
AR film (roll)
      AR film (low-tack)
      AR acryl (cast)
      AR acryl (extrude)
      AR information
3D Glass
Visualizing System

AR (anti-reflection) film
Roll Type E 1000mm width



MFAR --- Roll Type AR film / 1000mm Width film (Permanent adhesive type)



1000mm width
Roll type AR film - MFAR
For large size LCD protective case,
show windows, etc.
MFAR has 1000mm width and
Available from minimum of 2 meters.
 
  How to laminate
  How AR film works 
@@Price


  1000mm width
t = 0.1mm + Release layer 0.25mm

Item Code   Size   Unit Price 
MFAR-Roll
(1000mm width)
   
2 - 4 meter   $182 / meter
5 - 9 meter   $169 / meter
10 - 29 meter   $153 / meter
30 - meter   $138 / meter
A4 size (25 x 30cm) sample   $28

Apply AR film on both sides for full effect.
Light reflects both on the front and the reverse side of glass surface.
Reflections are approx 4-5% for each side, and total reflection sum up to approx 10%.
AR film reduces reflection down to approx 0.5% on each side and therefore applying film on both side
would reduce total reflection down to less than 1% (1/10). 
** Applying on only one side leaves out 5.5% reflection. Therefore please apply on both side.
  Front
reflect
  Back
reflect
  Total
reflect
without AR film 5.0 % + 5.0 % = 10.0 %
 AR film on one side 0.5 % + 5.0 % = 5.5 %
 AR film on both side 0.5 % + 0.5 % = 1.0 %
Notice : Multi-layered glass such as
double/ triple glazing glass requires
film to be applied on every surface.
For instances, double glazing glass requires
film to be applied on all 4 surfaces.
 


@@Specification

Specification & Inspection Criteria
Optical Characteristic
flectance curves

*graph is actual measurement data
Light transmission 92%
measuring
method
Measured regular reflection at 5
using a spectrophotometer.
Coat with black paint after polishing
back of the sample with sandpaper.
Haze 0.75%
Reflectance minimum less than 0.35%
Reflectance minimum wavelength 550nm
Average spectral luminous efficacy reflectance rate 0.6%
Membrane characteristic
Steel-wool abrasion good Measured with rubbing No.0000 steel-wool
back and forth 10 time with 250g/cu weight rub
Pencil strength 2H Compliance to JIS K540-1900
Adherence 100/100 Cross-cut test
Contact angle 90 Genuine contact angle
Measured with CA-W150 (Kyowa Interface Science)
finger print removability
*Above is actual measurement data, not guaranteed data.